Goggle Care Guide

TRI-FIT Swim Goggles Care Guide

Your TRI-FIT swim goggles are designed for premium performance, offering comfort, clarity, and protection whether you're training in the pool or competing in open water. To ensure they continue to perform at their best, it’s essential to care for them properly. This guide provides comprehensive instructions on how to use, clean, store, and maintain your goggles, helping you extend their lifespan and get the most out of every swim.

1. Proper Use of TRI-FIT Swim Goggles

Before diving into care instructions, let’s start with a few key tips on proper use:

• Fit Before Use: Make sure your goggles fit properly before entering the water. Adjust the head strap and nose bridge for a secure but comfortable fit. Ensure there are no leaks around the edges. Due to hygiene reasons, we cannot accept returns or exchanges once the goggles have been used unless there is a verified manufacturer’s defect.
• Adjust with Care: Avoid overstretching the head strap when putting your goggles on or taking them off. Stretching the strap excessively can cause it to lose elasticity or even snap.
• Avoid Over-Tightening: Over-tightening can lead to discomfort and unnecessary pressure on the eye sockets. Adjust the goggles so they sit snugly without causing discomfort.

2. Cleaning Your TRI-FIT Swim Goggles

Proper cleaning is essential to maintain lens clarity and prolong the anti-fog coating:

• Rinse After Every Use: After swimming, rinse your goggles thoroughly with fresh, cold water. This helps to remove chlorine, salt, sweat, and other residues that can degrade the lenses and coatings over time.
• Avoid Rubbing the Inside of the Lenses: The inside of the lenses has a special anti-fog coating. Touching, rubbing, or wiping the inside can damage this coating and reduce its effectiveness. Simply rinse and let the water naturally wash away debris.
• Gently Pat Dry: After rinsing, gently pat the goggles dry with a soft, lint-free cloth. Do not rub the lenses. Alternatively, let them air dry in a well-ventilated area, out of direct sunlight.

3. Anti-Fog Care and Maintenance

TRI-FIT swim goggles come equipped with a high-performance anti-fog coating that reduces the chances of fogging during use. Here’s how you can keep the coating effective for longer:

• Rinse Before Wearing: Rinsing your goggles with cold, fresh water before each use can help activate the anti-fog properties. This creates a thin, protective film over the lenses.
• Avoid Hot Water and Chemicals: Exposure to hot water or harsh chemicals (including soap and detergents) can degrade the anti-fog coating. Only rinse with cold, fresh water.
• Use Anti-Fog Sprays When Needed: Over time, the anti-fog coating may wear off. To maintain clarity, you can apply an anti-fog spray to rejuvenate the lenses. Follow the instructions on the spray and make sure it’s a product designed specifically for swim goggles.
• Avoid Spit Anti-Fog Methods: Though commonly used, spitting on lenses can introduce bacteria and degrade the lens over time. Stick to rinsing with water or using anti-fog sprays for the best results.

4. Storing Your TRI-FIT Swim Goggles

Proper storage is crucial to protect your goggles from scratches, damage, and deformation:

• Store in a Protective Case: When not in use, keep your goggles in their original protective case or a soft pouch. This prevents scratches, lens warping, and accidental damage.
• Avoid Direct Sunlight: Long exposure to direct sunlight can cause the silicone components to fade or become brittle. Store your goggles in a cool, shaded area.
• Do Not Leave Wet Goggles in Your Bag: Leaving wet goggles in a closed bag for long periods can encourage mould and bacterial growth. Always dry your goggles thoroughly before storing them.

5. Avoiding Common Goggle Issues

Here are a few practices to help prevent common problems like fogging, scratches, and loss of elasticity:

• Do Not Leave Goggles in Extreme Temperatures: Extreme heat or cold can warp the lenses, affect the silicone seals, and reduce the flexibility of the head strap. Always keep your goggles in a temperate environment.
• Be Mindful of Where You Store Your Goggles: Do not store goggles loose in a bag where they can rub against hard objects, zippers, or Velcro, which can scratch or damage the lenses.
• Handle with Care: Avoid pulling on the straps too hard and be gentle when putting on or taking off the goggles to ensure they last longer.

6. Tips for Prolonging the Life of Your Goggles

Following these simple tips can significantly extend the life of your TRI-FIT swim goggles:

• Rotate Between Pairs: If you swim frequently, consider rotating between two or more pairs of goggles. This reduces wear and allows each pair to dry completely between uses.
• Check and Replace Parts as Needed: Inspect your goggles regularly. If the strap, nose bridge, or other components show signs of wear, replace them to prevent breaks during use.
• Buy the Right Goggles for Your Needs: Choose goggles designed for the type of swimming you do most. TRI-FIT offers a range of goggles tailored for different conditions, including open water and pool training. Selecting the right pair will minimize wear and enhance performance.

 

Frequently Asked Questions

Q: How can I prevent my goggles from fogging up?
A: Make sure to rinse them in cold water before each use and avoid touching the inside of the lenses. You can also use anti-fog sprays as needed.

Q: My goggles are leaking. What should I do?
A: First, check the fit of your goggles. Adjust the nose bridge and straps to ensure a snug, leak-free seal. If your goggles continue to leak, it might be time to replace the silicone seals.

Q: Can I use soap or detergent to clean my goggles?
A: No. Using soap or detergent can damage the anti-fog coating and degrade the silicone. Always clean with fresh, cold water.

Q: How often should I replace my goggles?
A: This depends on how frequently you use them and how well they are cared for. With proper care, a good pair of goggles can last several months to a year.

Conclusion

Your TRI-FIT swim goggles are an essential part of your swimming gear, designed for optimal performance and comfort. By following these care instructions, you can keep them in excellent condition, ensuring clear vision and long-lasting use. For any further questions or support, please contact our customer service team on orders@tri-fitathletic.com.